Contacta HLD3 Manual de instalación y uso - Página 9

Navegue en línea o descargue pdf Manual de instalación y uso para Amplificador Contacta HLD3. Contacta HLD3 12 páginas. Hearing loop driver (hld)
También para Contacta HLD3: Manual de instalación (9 páginas), Manual de funcionamiento y mantenimiento (3 páginas), Manual de instalación (9 páginas)

To turn on the HLD3, turn the volume control knob (on the right of

the front panel) clockwise until the power indicator lights up.

2. Move to the position of the hearing loop. If using a hearing loop

pad, sit on the chair with the pad installed underneath.

3. Switch the hearing device to the "T" position or turn on the loop

listener, then turn on the audio source.

4. Audio is picked up by the telecoil in the hearing device.

5. Adjust the volume on the hearing loop driver as necessary. The

audio source volume control will not change the volume heard by

the hearing device.

There's nothing more you need to do!

7. Turn the volume control knob anti-clockwise until it clicks to power

off when the Home Loop is not being used.

To keep the system at its peak performance, the following procedures

should be carried out on a regular basis:

•

Ensure all connectors are firmly inserted into their sockets.

•

Do not stretch cables.

•

Clean the driver and the microphone with a dry soft cloth/

cleansing wipes. Do not use solvent based cleaners.

•

Do not allow cleaning fluids to enter the driver or back ports/vents

of the microphone.

Using the System