Contacta Loop-FSM Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida Contacta Loop-FSM. Contacta Loop-FSM 5 páginas. Audio frequency induction loop field strength meter

Imprimir página

Line In Flat Response Mode:

On the top of the unit is a new feature, audio dBV

level. The readings and the display help determine

what level of signal is Coming from the house feed.

Levels between -10dBV and +4dBV are considered

to be line level signals. Often a poor loop system

Sound comes from a very low level facility feed.

This input uses the last mode on the FSM and dis-

plays an accurate level which can then be demon-

strated to the facility. We prefer a level between -

10dBV and 0dBV.

To use this feature cycle through the various mode

until you see Line In Flat Response on the display.

Now connect up the XLR adapter which has an

XLR female on one end and an 1/8" TRS connector

on the other end. If you wish to make up your own

adapter use the following information.

1/8 in TRS connector

Tip --------------------------------------------- Pin 2

Ring ------------------------------------------ Pin 3

Sleeve ---------------------------------------- Pin 1

XLR female connector

Meter Operation Basics

Turning the meter ON and Off

On -

Press and hold button A until the screen lights

Off -

Press and continue to hold button "A" until the Powering

Down process is finished and the screen goes dark

Selecting the meter mode

When you press Button "A" it first displays the current mode

and the next press advances to the next meter mode:

Background Noise Test with Max indication

Signal Strength "A weighted" RMS / Peak

Field Strength "Flat" RMS / Max

Third Octave Levels 100, 200, 500, 1K, 2.5K, 5KHz

B" Button functions



In modes 1 - 3 pressing the "B" button reset the

MAX or PEAK readings



In mode 4 pressing the "B" button advances the

center frequency of the third octave filters

Use / Menu

Switch

Sensor Location

Button "A" On/Off and Mode con-

trol

Button "B" Reset/Select and Fre-

quency advance