Contacta Loop-FSM Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Contacta Loop-FSM. Contacta Loop-FSM 5 páginas. Audio frequency induction loop field strength meter

Imprimir página
Contacta Loop-FSM Manual do utilizador
Line In Flat Response Mode:
On the top of the unit is a new feature, audio dBV
level. The readings and the display help determine
what level of signal is Coming from the house feed.
Levels between -10dBV and +4dBV are considered
to be line level signals. Often a poor loop system
Sound comes from a very low level facility feed.
This input uses the last mode on the FSM and dis-
plays an accurate level which can then be demon-
strated to the facility. We prefer a level between -
10dBV and 0dBV.
To use this feature cycle through the various mode
until you see Line In Flat Response on the display.
Now connect up the XLR adapter which has an
XLR female on one end and an 1/8" TRS connector
on the other end. If you wish to make up your own
adapter use the following information.
1/8 in TRS connector
Tip --------------------------------------------- Pin 2
Ring ------------------------------------------ Pin 3
Sleeve ---------------------------------------- Pin 1
XLR female connector
8
Meter Operation Basics
Turning the meter ON and Off
On -
Press and hold button A until the screen lights
Off -
Press and continue to hold button "A" until the Powering
Down process is finished and the screen goes dark
Selecting the meter mode
When you press Button "A" it first displays the current mode
and the next press advances to the next meter mode:
1.
Background Noise Test with Max indication
2.
Signal Strength "A weighted" RMS / Peak
3.
Field Strength "Flat" RMS / Max
4.
Third Octave Levels 100, 200, 500, 1K, 2.5K, 5KHz
"
B" Button functions
In modes 1 - 3 pressing the "B" button reset the
MAX or PEAK readings
In mode 4 pressing the "B" button advances the
center frequency of the third octave filters
Use / Menu
Switch
Sensor Location
Button "A" On/Off and Mode con-
trol
Button "B" Reset/Select and Fre-
quency advance
3