AudioTouch c-buss Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación AudioTouch c-buss. AudioTouch c-buss 3 páginas. Advanced stereo compressor

Imprimir página

1. POWER ON

Main Voltage setting should be selected at 115 or 230V/AC

with selector (A). If correct for your country, you can

connect the power cord included and push on the power

switch in Front panel.

USER INTERFACE (AN@TOUCH) ©

The 'Patent pending' intuitive user interface

an@touch allows explicit display of all

parameters and their modification, storage

and recall.

It consists of a rotary luminous encoder (E)

used to changing the parameters for each

function selected by associated key (6 to 8).

5. METERS

In order to check signal integrity, each L/R

Input/Output has his own VU-meter. The

GR meter shows the amount of gain

reduction in 2dB steps, up to 20 dB.

9. 'ISOSONIC' DYNESS

Based on the 'isosonic' human hearing perception,

the accentuation of mediums on the detection

circuit (sidechain) enables new possibilities.

2. MIDI CONNECTIONS

For plugin Remote, standard MIDI cables

can be used in order to chain several

devices, each with an unique 'MIDI

number' (B).

6. Classic Compressor CONTROLS

THR [Threshold]: This sets the level above which signals will be

compressed.

ATT [Attack]: allows to adjust the time it takes the compressor to

react to the input signal.

RATIO: Sets the compression slope, how the output signal will

change in relation to the input signal when above the threshold.

Special Mode 'limit' (C) provides a limiter effect.

REL [Release]: allows adjustment of the compressor's unity gain

return time after going into compression.

Mode 'auto' (D) is a special setting 'program-dependent' for

release time.

M-UP [Make-up gain]: output gain adjustment after processing.

Special modes are activated by pressing and holding Encoder (E).

10. EXT SIDECHAIN

Allows XLR external connections (3) for Stereo

sidechain detection. If only one channel is

connected, operation is Mono.

3. SIDECHAIN CONNECTIONS

XLR electronically balanced

Inputs are active only if EXT

SIDECHAIN (10) is engaged.

7. DYNESS SETTING (INTERNAL SIDECHAIN)

The Low Shelving Filter avoids triggering the

sidechain with low frequencies. With the

'ISOSONIC' DYNESS function engaged (9), the

mid-freq pre-emphasis allows to soften some

aggressive sounds. In the 2 cases, there are 3

levels of adjustment possible: L1, L2 and L3.

PLUGIN REMOTE

C-buss is fully controllable with a software

(plugin) integrated in a host sequencer.

When the device is synchronized with the

software, the REMOTE (R) indicator turns

blue. It is red if there's a problem.

11. VINTAGE MODE

It is a special mode with 'old' Feedback type

compression, and transformers added in the audio

path instead of capacitors.

4. AUDIO CONNECTIONS

XLR Inputs and Outputs are electronically balanced with

differential signal between pins 2 & 3. Pin 1 is normally connected

to Ground except for Outputs if GND LIFT (G) is engaged.

8. MIX SETTING

Allows a true mix between compressed signal and

dry signal. When Input level and compressed

Output level are the same, Outputs are constant-

level regardless the MIX setting.

INTERNAL MEMORIES

There are 21 memories available to the user.

Pushing and holding Encoder (E) provides access to

memory functions. Memories are represented by

function keys (6-8) in 3 'banks' represented by the

illuminated keys 9-11. Then press a flashing button

to recall the associated memory. To write to a

memory, select the desired location with (E) and

then push and hold (E).

12. HARD BYPASS

True Bypass means that Output XLRs are directly

connected to the Input XLRs. When the unit is off,

Bypass is active.