DAPAudio Xtreme X-900 Manual del producto - Página 9
Navegue en línea o descargue pdf Manual del producto para Amplificador DAPAudio Xtreme X-900. DAPAudio Xtreme X-900 15 páginas. Amplifier with digital audio processor
Imprimir página
ONLINE MODE
1. Connect the amplifier to the PC with the right cable. Insert one end of the cable into the parallel port of
PC and the other end into the PC REMOTE port in the front panel of amplifier.
Start DSP testing software.
2. CONNECTION
Click the Debug button and then click Connect. Select a device number (1-255). If this number is the
same as the amplifier ID, the LCD shows:
At that time, the system can be tested by the DSP software. All the functions from the offline mode are not valid.
3. DISCONNECT
Click Debug button and then click Disconnect, the LCD shows:
Then the software testing is not valid. The system returns to the offline mode.
Regarding the operation of DSP software, please refer to the online help of it.
CONNECT SUCCESSFUL
PC CONTROL DEVICE
CONNECT CANCEL
MCU CONTROL DEVICE
the
Fig. 3
7