DAPAudio Xtreme X-900 Manuel du produit - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} DAPAudio Xtreme X-900. DAPAudio Xtreme X-900 15 pages. Amplifier with digital audio processor

Imprimer la page

ONLINE MODE

1. Connect the amplifier to the PC with the right cable. Insert one end of the cable into the parallel port of

PC and the other end into the PC REMOTE port in the front panel of amplifier.

Start DSP testing software.

2. CONNECTION

Click the Debug button and then click Connect. Select a device number (1-255). If this number is the

same as the amplifier ID, the LCD shows:

At that time, the system can be tested by the DSP software. All the functions from the offline mode are not valid.

3. DISCONNECT

Click Debug button and then click Disconnect, the LCD shows:

Then the software testing is not valid. The system returns to the offline mode.

Regarding the operation of DSP software, please refer to the online help of it.

CONNECT SUCCESSFUL

PC CONTROL DEVICE

CONNECT CANCEL

MCU CONTROL DEVICE

the

Fig. 3