Addonics Technologies HDUS1125LT Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Hardware informático Addonics Technologies HDUS1125LT. Addonics Technologies HDUS1125LT 18 páginas. 1:11 2.5” hdd duplicator lt
Imprimir páginaBasic Instructions
Installing drives into
the 1:11 Snap-In
Duplicator
1. Be sure the lock on each drive
door is in an unlock position. If not,
use the key that comes with the
Disk Array to unlock the drive door.
Pull on the door lever to swing open
the drive door all the way.
2. Slide a 2.5" SATA hard drive into
the drive slot with the drive connector
the drive slot with the drive
side facing in. The drive should slide
all the way into the slot with very little
resistance. Forcing the drive into the
slot will cause drive damage or
permanent damage to the Disk Array.
3. Once the drive is all the way into the
drive slot, close the door all the way till
the drive door latches securely. This will
engage power and data connection with
the hard drive. The LED lit for the drive
slot should lit if the Disk Array already
powered on. You may lock the drive
door with the key on page.
4. To remove the hard drive from
the Disk Array, simply follow the
step 2 – 3 in reverse.
www.addonics.com
LCD
Management
Console
Source Drive 1
Destination Drive 2-10
(Left to Right)
Technical Support (M-F 8:30am - 6:00pm PST)
Power Button
Destination Drive 1
Phone: 408-453-6212
Email: www.addonics.com/support/query/