Addonics Technologies HDUS1125LT User Manual - Page 3

Browse online or download pdf User Manual for Computer Hardware Addonics Technologies HDUS1125LT. Addonics Technologies HDUS1125LT 18 pages. 1:11 2.5” hdd duplicator lt

Print Page

Basic Instructions

Installing drives into

the 1:11 Snap-In

Duplicator

1. Be sure the lock on each drive

door is in an unlock position. If not,

use the key that comes with the

Disk Array to unlock the drive door.

Pull on the door lever to swing open

the drive door all the way.

2. Slide a 2.5" SATA hard drive into

the drive slot with the drive connector

the drive slot with the drive

side facing in. The drive should slide

all the way into the slot with very little

resistance. Forcing the drive into the

slot will cause drive damage or

permanent damage to the Disk Array.

3. Once the drive is all the way into the

drive slot, close the door all the way till

the drive door latches securely. This will

engage power and data connection with

the hard drive. The LED lit for the drive

slot should lit if the Disk Array already

powered on. You may lock the drive

door with the key on page.

4. To remove the hard drive from

the Disk Array, simply follow the

step 2 – 3 in reverse.

www.addonics.com

LCD

Management

Console

Source Drive 1

Destination Drive 2-10

(Left to Right)

Technical Support (M-F 8:30am - 6:00pm PST)

Power Button

Destination Drive 1

Phone: 408-453-6212

Email: www.addonics.com/support/query/