Acer 930 Manual Bios - Página 19

Navegue en línea o descargue pdf Manual Bios para Servidor Acer 930. Acer 930 46 páginas. High-performance system board
También para Acer 930: Manual del usuario (16 páginas), Manual (32 páginas)

Imprimir página
Acer 930 Manual Bios
2.6.2

Silent Boot

This parameter enables or disables the Silent Boot function. When set to
Enabled
, BIOS is in graphical mode and displays only an identification
logo during POST and while booting. After which the screen displays the
operating system prompt (such as DOS) or logo (such as Windows 95). If
any error occurred while booting, the system automatically switches to the
text mode.
Even if your setting is
Enabled
booting by pressing
after you hear a beep that indicates the activation of
the keyboard.
Disabled
When set to
, BIOS is in the conventional text mode where you
see the system initialization details on the screen.
2.6.3

Num Lock After Boot

This parameter allows you to activate the Num Lock function upon booting.
Enabled
The default setting is
2.6.4

Memory Test

When set to
Enabled
, this parameter allows the system to perform a RAM
test during the POST routine. When set to
only the memory size and bypasses the test routine. The default setting is
Disabled
.
2.6.5

Initialize SCSI Before IDE

Enabling this parameter allows SCSI devices installed in the system to be
initialized before IDE devices. You may enable this parameter if you have a
SCSI boot drive. When this parameter is disabled, the IDE drives are
normally initialized first during POST.
2.6.6

System Boot Drive

This parameter allows you to specify the system search sequence. The
selections are:
Drive A then C:
diskette in the drive, the system boots from drive A. Otherwise, it
boots from drive C.
BIOS Utility
, you may also switch to the text mode while
.
Disabled
The system checks drive A first. If there is a
, the system detects
2-19