Acer 930 바이오스 매뉴얼 - 페이지 19

{카테고리_이름} Acer 930에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer 930 46 페이지. High-performance system board
Acer 930에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 매뉴얼 (32 페이지)

페이지 인쇄
Acer 930 바이오스 매뉴얼
2.6.2

Silent Boot

This parameter enables or disables the Silent Boot function. When set to
Enabled
, BIOS is in graphical mode and displays only an identification
logo during POST and while booting. After which the screen displays the
operating system prompt (such as DOS) or logo (such as Windows 95). If
any error occurred while booting, the system automatically switches to the
text mode.
Even if your setting is
Enabled
booting by pressing
after you hear a beep that indicates the activation of
the keyboard.
Disabled
When set to
, BIOS is in the conventional text mode where you
see the system initialization details on the screen.
2.6.3

Num Lock After Boot

This parameter allows you to activate the Num Lock function upon booting.
Enabled
The default setting is
2.6.4

Memory Test

When set to
Enabled
, this parameter allows the system to perform a RAM
test during the POST routine. When set to
only the memory size and bypasses the test routine. The default setting is
Disabled
.
2.6.5

Initialize SCSI Before IDE

Enabling this parameter allows SCSI devices installed in the system to be
initialized before IDE devices. You may enable this parameter if you have a
SCSI boot drive. When this parameter is disabled, the IDE drives are
normally initialized first during POST.
2.6.6

System Boot Drive

This parameter allows you to specify the system search sequence. The
selections are:
Drive A then C:
diskette in the drive, the system boots from drive A. Otherwise, it
boots from drive C.
BIOS Utility
, you may also switch to the text mode while
.
Disabled
The system checks drive A first. If there is a
, the system detects
2-19