Acer 930 바이오스 매뉴얼 - 페이지 20
{카테고리_이름} Acer 930에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer 930 46 페이지. High-performance system board
Acer 930에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 매뉴얼 (32 페이지)
Drive C then A:
hard disk (drive C) installed, the system boots from drive C.
Otherwise, it boots from drive A.
C:
The system always boots from drive C.
A:
The system always boots from drive A.
2.6.7
Boot From CD-ROM
When set to
Enabled
, the system checks for a bootable CD in the IDE
CD-ROM drive. If a CD is present, the system boots from the CD-ROM;
otherwise, it boots from the drive specified in the System Boot Drive
parameter. When set to
Disabled
specified in the System Boot Drive parameter.
Note that the CD-ROM drive mentioned above
refers to an IDE CD-ROM drive. When setting the
boot options for a SCSI CD-ROM drive, see
section 2.6.8 for details on SCSI device boot
parameters.
2.6.8
Boot from Onboard SCSI Device
Enabling this parameter allows you to boot the system from an onboard
SCSI device. The system boots from the drive specified in the System Boot
Drive parameter when this parameter is set to
grayed and non-configurable when the Onboard SCSI parameter under the
Onboard Devices Configuration menu is disabled.
2-20
The system checks drive C first. If there is a
, the system boots from the drive
Disabled
. This item is
User's Guide