Apogee DLX24 Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de grabación Apogee DLX24. Apogee DLX24 20 páginas. Digital loudspeaker controller/system control manager software
Imprimir página5. Software Configuration
5.4 Input Processing
4) COMP/LIMIT (Compressor/Limiter)- This is the dynamics processor of the input channel with signal-
peak detection. It has the following controls:
• THRESHOLD- Adjusts the threshold of the COMP/LIMITER (dB).
• RATIO- Gain reduction of the processed (compressed) signal compared to the incoming signal.
• ATTACK- The time it takes the compressor to start compressing after the threshold has been reached.
• RELEASE- The time the compressor takes to stop compressing after the input signal has fallen below
the threshold.
• MAKE-UP- Gain applied to the signal after compression, to globally increase its level once dynamically
modified.
• KNEE- The type of curve (transition zone around the threshold) that determines whether the bend in the
response curve around threshold is abrupt (HARD) or gradual (SOFT).
• GR (Gain Reduction)- This real-time meter (dB) indicating COMP/LIMIT attenuation, including
MAKE-UP GAIN
5) COPY/PASTE- These icons "copy" the settings from one channel and "paste" them in another,
cloning the settings. (All settings, except the label or channel name, can be copied and pasted.)
6) LINK GROUPS- The two inputs can be part of the
same LINK GROUP. In this mode, all the settings of an
input (for example, the left channel) will be automati-
cally applied to the other input (right channel), and vice
versa. (see Fig. 5-12)
Pressing the F2 key, allows you to rename an input or
output channel. (see Fig. 5-13)
(cont'd)
8
Fig. 5-12
Fig. 5-13