Apogee DLX24 User Instruction Manual - Page 12

Browse online or download pdf User Instruction Manual for Recording Equipment Apogee DLX24. Apogee DLX24 20 pages. Digital loudspeaker controller/system control manager software

Print Page

1. Software Configuration

5. Software Configuration

5.4 Input Processing

4) COMP/LIMIT (Compressor/Limiter)- This is the dynamics processor of the input channel with signal-

peak detection. It has the following controls:

• THRESHOLD- Adjusts the threshold of the COMP/LIMITER (dB).

• RATIO- Gain reduction of the processed (compressed) signal compared to the incoming signal.

• ATTACK- The time it takes the compressor to start compressing after the threshold has been reached.

• RELEASE- The time the compressor takes to stop compressing after the input signal has fallen below

the threshold.

• MAKE-UP- Gain applied to the signal after compression, to globally increase its level once dynamically

modified.

• KNEE- The type of curve (transition zone around the threshold) that determines whether the bend in the

response curve around threshold is abrupt (HARD) or gradual (SOFT).

• GR (Gain Reduction)- This real-time meter (dB) indicating COMP/LIMIT attenuation, including

MAKE-UP GAIN

5) COPY/PASTE- These icons "copy" the settings from one channel and "paste" them in another,

cloning the settings. (All settings, except the label or channel name, can be copied and pasted.)

6) LINK GROUPS- The two inputs can be part of the

same LINK GROUP. In this mode, all the settings of an

input (for example, the left channel) will be automati-

cally applied to the other input (right channel), and vice

versa. (see Fig. 5-12)

Pressing the F2 key, allows you to rename an input or

output channel. (see Fig. 5-13)

(cont'd)

Fig. 5-12

Fig. 5-13