Appareo STRATUS ESG Manual del piloto - Página 6
Navegue en línea o descargue pdf Manual del piloto para Radio marítima Appareo STRATUS ESG. Appareo STRATUS ESG 13 páginas. Portable receiver connector plate
También para Appareo STRATUS ESG: Manual de instalación (5 páginas), Manual (9 páginas)
Imprimir página
Flight ID screen: Displays the currently entered Flight ID.
Brightness screen: Allows for adjustment of screen brightness while in
flight. Press ENT, then the left or right arrow keys to adjust brightness.
Press ENT again to confirm the new setting.
2.6.
Arrow keys
Use the arrow keys to advance forward and backward when entering
numbers and letters. They can also be used to cycle through the various
display screens.
2.7.
Numerical keys
Use the numerical keys to enter information such as the flight ID or
squawk code. See Section 3.1 for directions on how to enter the squawk
code for your aircraft's flight and Section 3.2 for instructions for how to
enter a flight ID.
Sometimes, a textual or non-numerical input will be required. If this is the
case, press the number that is associated with the letter group you want
to input, according to the graphic on the screen. To cycle through the
letters associated with each number, press the number key repeatedly
until the letter you want to input appears. You can input a space after
cycling through all of the letters for a particular number key. Once the
correct character is selected, use the arrow keys to advance to the next
field to enter the next character in the sequence.
2.8.
Identification (IDENT) key
If you are instructed by ATC to IDENT, press the IDENT key on your
Stratus ES/ESG. IDENT will make your aircraft's reply pulse on ATC's
monitors for 18 seconds. "IDENT" will be shown on the display while
IDENT is activated.
2.9.
VFR key
Press the VFR key to broadcast the VFR squawk code. The factory-set
VFR code is 1200, but this number may be reconfigured by your dealer.
4