Appareo STRATUS ESG Manual del piloto - Página 7

Navegue en línea o descargue pdf Manual del piloto para Radio marítima Appareo STRATUS ESG. Appareo STRATUS ESG 13 páginas. Portable receiver connector plate
También para Appareo STRATUS ESG: Manual de instalación (5 páginas), Manual (9 páginas)

Imprimir página

1. Mode Selection Keys

2.10. Power (PWR) key

Press the PWR key to power on and power off Stratus ES/ESG.

Using Stratus ES/ESG

3.1.

Entering a squawk code

When on any screen that the squawk code is showing, press the number

keys (0 through 7) to enter a new squawk code. Five seconds after

the fourth digit is entered, Stratus ES/ESG will automatically save the

entered squawk code.

NOTE: If you incorrectly enter a number before the code is automatically

saved, press the left arrow key to go back to the previous field. Then,

press the correct number key.

WARNING: Squawk codes 7500 (hijacking), 7600 (radio failure), and

7700 (emergency) are reserved for emergencies. There may also be

other reserved codes, depending on the region you are flying in. It is

the pilot in command's responsibility to comply with their jurisdiction's

operating rules and regulations.

3.2.

Entering the flight identification number

To enter your flight identification number:

1. Press FUNC or the arrow keys until "Flight ID" appears. The

previously entered flight identification number will be displayed on

the Flight ID screen.

2. Press ENT.

3. Use the number keys to overwrite the previously entered

flight ID. Use the left and right arrow keys to change the cursor

position. See Section 2.7 for instructions on how to enter non-

numerical input.

NOTE: If the new flight ID is less than 8 digits and there are

characters from the previously entered flight ID remaining after the

new flight ID has been input, insert spaces in those fields to overwrite

the characters.

4. Press ENT to confirm the new flight ID.