DURKOPP ADLER 806 Manual de instrucciones de instalación - Página 15
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para máquinas de coser DURKOPP ADLER 806. DURKOPP ADLER 806 19 páginas.
Imprimir página
7.4 Transfer plate
7.4.1 Setting the reference point
16
1
2
Rule and control
–
Activate the function "Reference travel".
The transfer carriage performs a reference travel.
The display must show for X and Y a value between 6 and 15.
Correction
–
By means of a key, set the switch 1 for releasing the
electromagnetic switch 1 so that the X-value ranges between 9
and 11.
–
By means of a key, set the switch 2 for releasing the
electromagnetic switch so that the Y-value ranges between 9
and 11.
–
Activate the function "Reference travel".
The display must show for X and Y a value between 9 and 11.
NOTE !
Following a reference travel it is always necessary to carry out a
position balancing (see chapter 7.5). It is also necessary to check the
positions of the transfer carriage.