DURKOPP ADLER 806 설치 지침 매뉴얼 - 페이지 15

{카테고리_이름} DURKOPP ADLER 806에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DURKOPP ADLER 806 19 페이지.

7.4 Transfer plate

7.4.1 Setting the reference point

Rule and control

–

Activate the function "Reference travel".

The transfer carriage performs a reference travel.

The display must show for X and Y a value between 6 and 15.

Correction

–

By means of a key, set the switch 1 for releasing the

electromagnetic switch 1 so that the X-value ranges between 9

and 11.

–

By means of a key, set the switch 2 for releasing the

electromagnetic switch so that the Y-value ranges between 9

and 11.

–

Activate the function "Reference travel".

The display must show for X and Y a value between 9 and 11.

NOTE !

Following a reference travel it is always necessary to carry out a

position balancing (see chapter 7.5). It is also necessary to check the

positions of the transfer carriage.