Data Sync Engineering RCU-MP3 Manual - Página 6

Navegue en línea o descargue pdf Manual para Reproductor MP3 Data Sync Engineering RCU-MP3. Data Sync Engineering RCU-MP3 6 páginas.

Connecting The MP3 Player To Your Jukebox

Jukebox CCC

9-Pin mini

DIN Connector

DC Power Supply

Barrel type plug

2.1mm x 5.5mm

Center pin positive

Jukebox Amplifier

Plug in the 9-pin mini DIN connector (arrow or notch facing

up). Position the 5-pin CCC connector through the jukebox

cable clam ps then plug into P5 "DATA" connector on the

Central Control Computer.

Connect the red 5-pin audio cable to the "aux" input on the

amplifier. If your jukebox has a light display, plug that

connector onto the extended pins. Plug the other end of the

cable to the MP3-DSP RCA audio connectors.

Plug in the DC power connector from the AC adapter then

plug the adapter into the SERVICE outlet on your jukebox

power supply. Turn on your jukebox.

Quick Test of the MP3-DSP Player

You can invoke the test mode by creating a text file named "W-.TXT" (thats W dash dot TXT) and place it in any of

your disc folders. When the MP3-DSP is powered up and finds this file, it will enter the test mode and

The audio output of the MP3-DSP has enough signal to connect

continuously play every song in every folder.

directly to a headphone or connect it to your amplifier.

Don't forget to delete this file when you're done testing.

DISCLAIMER – PLEASE READ

The RCU-MP3 kit was developed for jukebox owners for non public performance use. We do not

supply jukebox licenses and do not have any knowledge of what is required. It is the jukebox

owners responsibility to obtain all applicable licenses for public performance of copyright music.