Data Sync Engineering RCU-MP3 Manual - Page 6
Browse online or download pdf Manual for MP3 Player Data Sync Engineering RCU-MP3. Data Sync Engineering RCU-MP3 6 pages.
Print PageConnecting The MP3 Player To Your Jukebox
Jukebox CCC
9-Pin mini
DIN Connector
DC Power Supply
Barrel type plug
2.1mm x 5.5mm
Center pin positive
Jukebox Amplifier
Plug in the 9-pin mini DIN connector (arrow or notch facing
up). Position the 5-pin CCC connector through the jukebox
cable clam ps then plug into P5 "DATA" connector on the
Central Control Computer.
Connect the red 5-pin audio cable to the "aux" input on the
amplifier. If your jukebox has a light display, plug that
connector onto the extended pins. Plug the other end of the
cable to the MP3-DSP RCA audio connectors.
Plug in the DC power connector from the AC adapter then
plug the adapter into the SERVICE outlet on your jukebox
power supply. Turn on your jukebox.
Quick Test of the MP3-DSP Player
You can invoke the test mode by creating a text file named "W-.TXT" (thats W dash dot TXT) and place it in any of
your disc folders. When the MP3-DSP is powered up and finds this file, it will enter the test mode and
The audio output of the MP3-DSP has enough signal to connect
continuously play every song in every folder.
directly to a headphone or connect it to your amplifier.
Don't forget to delete this file when you're done testing.
DISCLAIMER – PLEASE READ
The RCU-MP3 kit was developed for jukebox owners for non public performance use. We do not
supply jukebox licenses and do not have any knowledge of what is required. It is the jukebox
owners responsibility to obtain all applicable licenses for public performance of copyright music.