Durr Dental VISTACAM2 Manual de instrucciones de instalación y funcionamiento - Página 8

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Estación de acoplamiento Durr Dental VISTACAM2. Durr Dental VISTACAM2 13 páginas.

Imprimir página

INSTALLATION

5. SET UP

5.1 Room set-up

• The room temperature must not fall below +

10 ° C in winter and in the summer must not

rise above + 40 ° C.

• Installation in wet or damp rooms is

prohibited.

5.2 Setup options

• The Docking-station may be installed

together with the VistaCam2 on a cupboard

or on a trolley.

• Wall mounting.

• Mounting on a support of the treatment unit.

• On the side of a VistaCart.

6. INSTALLATION

6.1 Horizontal set up

When installing horizontally on a cupboard or

on the VistaCart first stick the rubber feet

pads in the position marked.

6.2 Mounting plate

In order that the VistaCam2 is securely fixed

to the Docking-station when mounting on the

wall, on a pipe or on the VistaCart the

mounting plate must first be fixed to the front

edge.

Procedure:

• Remove screw (X).

• Place mounting plate in position.

• Screw into place.

6.3 Wall mounting

Screw the Docking-station onto the wall using

the screws and rawlplugs supplied. When

connecting the VistaCam2 and the Docking-

station together take care that the front cover

plate of ther Docking-station is placed under

the prefitted mounting plate and the

VistaCam2 is firmly held in position.

When mounting in this position do not

attach the rubber foot pads of the

Docking-station, otherwise the front

rail of the Docking-station will not lie

flush.