CB2 THE WALL Instrucciones de montaje - Página 4

Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior CB2 THE WALL. CB2 THE WALL 5 páginas. Wardrobe
También para CB2 THE WALL: Instrucciones de montaje (4 páginas)

Imprimir página

the wall

Insert 8 shelf pins at desired shelf heights. Place

each adjustable shelf on pins, making sure shelf

is securely supported by shelf pins.

Assembly is now complete.

For added safety and stability, it is recommended that the wall mounting

hardware be installed. For safe mounting, it is essential to use wall anchors

appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to

wood studs whenever possible.

NOTE: If you are unsure about your wall type or what mounting

method you should use, consult a qualified professional or your local

hardware store.

A) Attach 2 mounting brackets to top of unit using 2 small screws per

bracket.

B) Determine the final location of unit. Mark position on the wall,

approximately 2" below the mounting bracket mounted to the back of the

unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in

the wall that is slightly smaller in diameter than the anchor. Gently tap the

plastic anchor until the flange of the anchor is flush with the wall.

D) Attach 2 mounting brackets to the wall by inserting 2 large screws

through each mounting bracket and into the wall anchor.

E) Place the unit so the mounting brackets on the back edge are aligned

with the wall brackets.

F) Lace one end of each wall strap through brackets, and into the other

end of the strap.

G) Pull the strap tightly until secure.

Wall mounting assembly is now complete.

Made in Vietnam - r04

WARDROBE

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

cleaning and care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners.

Page 4 of 5