CB2 THE WALL Instruções de montagem - Página 4
Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior CB2 THE WALL. CB2 THE WALL 5 páginas. Wardrobe
Também para CB2 THE WALL: Instruções de montagem (4 páginas)
the wall
Insert 8 shelf pins at desired shelf heights. Place
each adjustable shelf on pins, making sure shelf
is securely supported by shelf pins.
9
Assembly is now complete.
For added safety and stability, it is recommended that the wall mounting
hardware be installed. For safe mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to
wood studs whenever possible.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your local
hardware store.
A) Attach 2 mounting brackets to top of unit using 2 small screws per
bracket.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the mounting bracket mounted to the back of the
unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in
the wall that is slightly smaller in diameter than the anchor. Gently tap the
plastic anchor until the flange of the anchor is flush with the wall.
D) Attach 2 mounting brackets to the wall by inserting 2 large screws
through each mounting bracket and into the wall anchor.
E) Place the unit so the mounting brackets on the back edge are aligned
with the wall brackets.
F) Lace one end of each wall strap through brackets, and into the other
end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
Made in Vietnam - r04
WARDROBE
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
D
C
F
A
Page 4 of 5