Dustless 16 Series Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Aspiradora Dustless 16 Series. Dustless 16 Series 8 páginas.
Imprimir página2. Place the HEPA filter cover support on the
HEPA filter.
3. Place the HEPA filter cover over the HEPA
filter cover support and HEPA filter. Place
the 10" hose clamp over the HEPA filter
cover so it rests on the metal ring of the
filter. Tighten the clamp with a screw
driver.
THOROUGH FILTER AND COVER CLEANING
Hand or machine wash the inner and outer
filters as well as filter cover. Let it line dry.
DO NOT PUT IN THE DRYER
HEPA filter should be discarded, DO NOT
attempt to clean HEPA filter.
RECOMMENDED REPLACEMENT
INTERVALS
Every 6 months: Replace HEPA Filters
As needed: Replace WunderBag
Note: In order to prevent unnecessary downtime,
it is recommended that you keep the following
items in stock:
•
1X HEPA Filters
•
2X WunderBags
•
Motor Brushes
8
FAQ
QUESTION
Why is the vacuum
blowing dust?
Why have I lost
suction?
Why are my filters
getting wet?
Will the filter(s)
meet current EPA
& OSHA guidelines
for asbestos and
mold removal?
Why does the
WunderBag say "do
not use for toxic
materials including
lead"?
WARRANTY
THREE-YEAR LIMITED WARRANTY
At Dustless Technologies, we stand behind
what we build. We warrant this product to
the original retail purchaser against defects
in materials or workmanship for a period of
three years after date of purchase.
This limited warranty does not cover
claims resulting from: (I) misuse (II) neglect
(III) modification (IV) failure to follow
instructions.
WARRANTY CARD
Please register your product online at
dustlesstools.com within 90 days of
purchase.
WARRANTY CLAIMS
For warranty or returns with any of our
products, please contact your place of
purchase. Technical support is available at
(800)568-3949 or [email protected].
ANSWER
• Check filter(s) for holes
and that they are securely
in place.
• WunderBag may not be
securely in place.
• The drain cap may be
open.
• Check and clear any
obstruction in the hose or
attachments.
• Filters may need to be
cleaned/replaced.
• Agitator rod cover/brass
plug may need tightening.
• WunderBag may be full
and need to be replaced.
• Hose may have a split
and needs to be replaced.
• Barrel should be empty
before use.
• Make sure the drain cap is
clean, has an o-ring and is
screwed on tight.
• The outer and inner filters
do not.
• The HEPA filter does.
• The WunderBag must
be used in line with a
Dustless HEPA vacuum
to guarantee proper
filtration.
OM007_0614