Dustless 16 Series Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dustless 16 Series. Dustless 16 Series 8 pages.

Imprimer la page

2. Place the HEPA filter cover support on the

HEPA filter.

3. Place the HEPA filter cover over the HEPA

filter cover support and HEPA filter. Place

the 10" hose clamp over the HEPA filter

cover so it rests on the metal ring of the

filter. Tighten the clamp with a screw

driver.

THOROUGH FILTER AND COVER CLEANING

Hand or machine wash the inner and outer

filters as well as filter cover. Let it line dry.

DO NOT PUT IN THE DRYER

HEPA filter should be discarded, DO NOT

attempt to clean HEPA filter.

RECOMMENDED REPLACEMENT

INTERVALS

Every 6 months: Replace HEPA Filters

As needed: Replace WunderBag

Note: In order to prevent unnecessary downtime,

it is recommended that you keep the following

items in stock:

•

1X HEPA Filters

•

2X WunderBags

•

Motor Brushes

FAQ

QUESTION

Why is the vacuum

blowing dust?

Why have I lost

suction?

Why are my filters

getting wet?

Will the filter(s)

meet current EPA

& OSHA guidelines

for asbestos and

mold removal?

Why does the

WunderBag say "do

not use for toxic

materials including

lead"?

WARRANTY

THREE-YEAR LIMITED WARRANTY

At Dustless Technologies, we stand behind

what we build. We warrant this product to

the original retail purchaser against defects

in materials or workmanship for a period of

three years after date of purchase.

This limited warranty does not cover

claims resulting from: (I) misuse (II) neglect

(III) modification (IV) failure to follow

instructions.

WARRANTY CARD

Please register your product online at

dustlesstools.com within 90 days of

purchase.

WARRANTY CLAIMS

For warranty or returns with any of our

products, please contact your place of

purchase. Technical support is available at

(800)568-3949 or [email protected].

ANSWER

• Check filter(s) for holes

and that they are securely

in place.

• WunderBag may not be

securely in place.

• The drain cap may be

open.

• Check and clear any

obstruction in the hose or

attachments.

• Filters may need to be

cleaned/replaced.

• Agitator rod cover/brass

plug may need tightening.

• WunderBag may be full

and need to be replaced.

• Hose may have a split

and needs to be replaced.

• Barrel should be empty

before use.

• Make sure the drain cap is

clean, has an o-ring and is

screwed on tight.

• The outer and inner filters

do not.

• The HEPA filter does.

• The WunderBag must

be used in line with a

Dustless HEPA vacuum

to guarantee proper

filtration.

OM007_0614