Datamax C82-00-40000004 Manual - Página 5

Navegue en línea o descargue pdf Manual para Lector de códigos de barras Datamax C82-00-40000004. Datamax C82-00-40000004 10 páginas. Cutter option

Step 3: Using the Option

During operation, cut labels will be dispensed after printing. Begin using the option as follows:

Load Media (see the Operator's Manual for

details). Then, route the Media out the Cutter

Opening.

B) Plug the power cord into the AC Receptacle and

turn 'On' the Power Switch.

C) Ensure that READY is displayed on the Front

Panel then press the FEED Key, and proceed

according to your observations:



If a cut label is dispensed, this completes the

installation; or,



If the label feeds forward without being cut,

proceed to Step 4: "Configuring the Printer."



Note: The operation of the Cutter can also be controlled by host software commands, so ensure

that your labeling program is properly configured for use, and for cutting labels to the desired

size.

Media

Cutter

Opening

Front Panel

FEED

Key