Datamax C82-00-40000004 매뉴얼 - 페이지 5

{카테고리_이름} Datamax C82-00-40000004에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax C82-00-40000004 10 페이지. Cutter option

Step 3: Using the Option

During operation, cut labels will be dispensed after printing. Begin using the option as follows:

Load Media (see the Operator's Manual for

details). Then, route the Media out the Cutter

Opening.

B) Plug the power cord into the AC Receptacle and

turn 'On' the Power Switch.

C) Ensure that READY is displayed on the Front

Panel then press the FEED Key, and proceed

according to your observations:



If a cut label is dispensed, this completes the

installation; or,



If the label feeds forward without being cut,

proceed to Step 4: "Configuring the Printer."



Note: The operation of the Cutter can also be controlled by host software commands, so ensure

that your labeling program is properly configured for use, and for cutting labels to the desired

size.

Media

Cutter

Opening

Front Panel

FEED

Key