Datamax M-Class Mark II Manual - Página 8

Navegue en línea o descargue pdf Manual para Lector de códigos de barras Datamax M-Class Mark II. Datamax M-Class Mark II 10 páginas. Rfid option
También para Datamax M-Class Mark II: Manual (6 páginas), Manual (8 páginas), Manual de inicio rápido (4 páginas), Manual de inicio rápido (8 páginas), Manual de inicio rápido (6 páginas), Manual de inicio rápido (8 páginas)

 Route the Backing Material under the Assist Roller and around the Internal Rewinder, as shown

below.

Backing Material

Assist Roller

 Note: The Media Retainer can be used in place of the Media Clip for a more consistent rewound roll. The Media

Clip and Media Retainer cannot be used together.

 Put the leading edge of the Media into a Slot on the Internal Rewinder and insert the Media Clip. Be

sure the leading edge of the Media is cut square and that is inserted evenly into the slot.

 Manually rotate the Internal Rewinder to remove slack from the Media.

 Plug in and turn 'On" the printer. After initialization, press the FEED Button to align the next label to

the top of form position. (If a peeled label is presented, remove it to proceed.) The printer is now ready

for on-demand use.

Internal Rewinder

Backing Material

Slots

Media Clip

Retainer

Thumbscrew