Datamax M-Class Mark II 매뉴얼 - 페이지 8

{카테고리_이름} Datamax M-Class Mark II에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax M-Class Mark II 10 페이지. Rfid option
Datamax M-Class Mark II에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄
Datamax M-Class Mark II 매뉴얼
 Route the Backing Material under the Assist Roller and around the Internal Rewinder, as shown
below.
Backing Material
Assist Roller
 Note: The Media Retainer can be used in place of the Media Clip for a more consistent rewound roll. The Media
Clip and Media Retainer cannot be used together.
 Put the leading edge of the Media into a Slot on the Internal Rewinder and insert the Media Clip. Be
sure the leading edge of the Media is cut square and that is inserted evenly into the slot.
 Manually rotate the Internal Rewinder to remove slack from the Media.
 Plug in and turn 'On" the printer. After initialization, press the FEED Button to align the next label to
the top of form position. (If a peeled label is presented, remove it to proceed.) The printer is now ready
for on-demand use.
Internal Rewinder
6
Backing Material
Slots
Media Clip
Retainer
Thumbscrew