Afag IRG 1-MS Traducción de las instrucciones de uso originales - Página 7

Navegue en línea o descargue pdf Traducción de las instrucciones de uso originales para Controlador Afag IRG 1-MS. Afag IRG 1-MS 11 páginas.

3 Description of the device

Control module for 1-phase capacitor motors

The module can be switched on or off from a higher-level system e.g. "SMART-Box"

or PLC via an enable input (M8) with a 24V, DC signal.

For test purposes, the enable can be bypassed internally by a switch. The status of

the output is indicated by an LED on the front panel.

Miniature magnets can also be operated safely at the IRG 1-S con-

troller!

In the case of applications that require the oscillation conveyor to

be switched ON and OFF constantly (e.g. dust switching, hopper

control system, etc.), the prescribed controller input must be

used. If the load circuit is disconnected with a switch or a relay

the controller may be damaged.

If the controller is switched on, never insert or remove the plug at

the vibration conveyor being operated. This can damage the ap-

pliance.

Repair work must be carried out by qualified personnel only. We

recommend that repairs are carried out on our premises.

Release: 1.1

NOTE

CAUTION

NOTE

2014-11-12

Page 7