Datavideo SE-1000 Manual complementario - Página 3

Navegue en línea o descargue pdf Manual complementario para Interruptor Datavideo SE-1000. Datavideo SE-1000 7 páginas. Datavideo se-1000 switcher: supplementary guide
También para Datavideo SE-1000: Manual de referencia (4 páginas)

Imprimir página

5 cameras & 1 computer mixed live for projection

1) Connect your cables as shown in the diagram above.

2) Conﬁ gure the switcher's input signal type. Press

FUNC and SETUP, select F1 and adjust it to

SETUP

FUNC

"FORMT 4/15". Formats available are as follows:

PGM

480/59i, 576/50i,1080/59i, 720/59p, 720/50p.

Press F4 to conﬁ rm your selection.

3) Now we set up the internal converters to

CH1

FN01

output composite for monitoring. Set the "Format/

Standard Converter" (above the T-bar) by turning

the dial to "CH1" and press the dial to conﬁ gure

Channel #1.

FORMAT/STANDARD

4) CH1 "FN01" sets the output to SD or HD by

CONVERTER

pressing the selector and turning it to the right to

cycle the settings. To deselect the function, press

the selector and turn the dial to the right to select

"FN02".

SE-1000 Applications

FORMT

| MODE

4/15

| 480/59i

| EXEC

5) CH2 "FN02" sets the signal output type depending on

CH1

FN02

HD or SD signal types. To make changes to the signal

480i

CVBS

output format press the knob and select "480iCVBS"

(required for TLM-433 monitors). Repeat this step for

each camera input.

FORMAT/STANDARD

CONVERTER

6) Proceed to the required cross-

point conﬁ guration. Press FUNC

and XPT to enter the crosspoint

setup. Turn the F1 dial to "XPTAS

2/3" and set the crosspoints as

follows:

XPT 1 = IN1

XPT 2 = IN2

XPT 3 = IN3

XPT 4 = IN4

XPT 5 = IN5

XPT 6 = DVI

XPT 7 = BLK

XPTAS

| XPT

| SIG

2/3

IN1