Datavideo DAC-2 Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Monitor Datavideo DAC-2. Datavideo DAC-2 13 páginas. Important note to make dac-2/dac-100 work with pinnacle dv500
También para Datavideo DAC-2: Manual de configuración rápida (6 páginas), Manual complementario (5 páginas), Manual complementario (13 páginas)

Imprimir página

FRONT PANEL CONTROL

Select DV input:

(Decode Mode)

Press on this button

to Reset the system

and select DV input

DV input indicator

"On" as DV input

Select Analog Video input:

(Encode mode):

1. To select CV/S-Video or

YUV video input source

2. Hold down this button

and press on the "DV"

button to enable CV output

Color Bar Pattern video.

Press on the "DV" button

back to normal video out

Y.U.V. TO DV CONVERTER DAC-2

Gen-Lock (C-sync) input:

1). Typical YUV input

2). YUV + C-Sync input

There are three functions for this button (Please see Page

7 for more detailed instructions):

(NTSC MODELS ONLY)

Decode Mode: (DV input)

Mode 1 Default is the Windows 2000 mode

(This mode is primarily for Windows 2000 users.)

Please Note: The DAC-2 will always default to this mode on power up.

Mode 2 is a secondary mode that works well with MACs

(running OS X) and windows

Mode 3 is a general setting for other DV devices (Cameras,

etc.)

Encode Mode: (DV output)

Press (Do Not Hold) to select 12-bit/32KHz or

16-bit/48KHz DV audio Encode mode

The 32KHz sampling rates is most commonly used for

DV camcorders and 48KHz is commonly used for

DVD as well as DV capture cards

Note: The DAC-2 will auto detect your audio decoding (exporting back

to tape) settings of your settings of your non-linear editing software.

C-SYNC

V(R-Y)

U(B-Y)

Y: U:V Input