Datavideo TP-200 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios de vídeo profesional Datavideo TP-200. Datavideo TP-200 16 páginas. Prompter kit for apple ipad

Imprimir página

Below Lens Assembly

1.
Attach/screw the tripod camera quick release plate to the screw holes on the base of the
prompter frame. Slide and secure the tripod plate, with prompter frame on top, onto the head
of tripod. Ensure the vertical plate of the prompter frame is facing toward the onscreen talent.
2.
Fit the camera riser screw from below the prompter frame's long top slot. Marry the camera's
base plate screw hole with Camera riser screw and secure the camera to the frame. Adjust
position of the camera so the camera lens is at the edge of the prompter frame.
3.
Use a wing nut screw to secure the mounting bracket for the iPad™ to the front of the
Prompter frame's vertical plate.
4.
Put the iPad™ into the supplied rubber sleeve so the holes allow access to the power input
and headphone socket. Note that there are two sleeves supplied in the kit, one is for the
original iPad™ and the other is for an iPad2™.
5.
Turn on the iPad™ and launch prompter software then prepare the text to be used. Slide the
iPad™ into the mounting bracket and ensure everything is secure. If you are using an
iPad2™ fit the neoprene insert sticker to the inside of the bracket to ensure a secure fit.
6.
If using the wired remote control plug the remote into headphone socket on the iPad™.
7.
Adjust the prompter settings as necessary.
8.
You should now be ready to start using the iPad™ Prompter within your project.
10