Datavideo TP-200 사용 설명서 - 페이지 10

{카테고리_이름} Datavideo TP-200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo TP-200 16 페이지. Prompter kit for apple ipad

Below Lens Assembly

Attach/screw the tripod camera quick release plate to the screw holes on the base of the

prompter frame. Slide and secure the tripod plate, with prompter frame on top, onto the head

of tripod. Ensure the vertical plate of the prompter frame is facing toward the onscreen talent.

Fit the camera riser screw from below the prompter frame's long top slot. Marry the camera's

base plate screw hole with Camera riser screw and secure the camera to the frame. Adjust

position of the camera so the camera lens is at the edge of the prompter frame.

Use a wing nut screw to secure the mounting bracket for the iPad™ to the front of the

Prompter frame's vertical plate.

Put the iPad™ into the supplied rubber sleeve so the holes allow access to the power input

and headphone socket. Note that there are two sleeves supplied in the kit, one is for the

original iPad™ and the other is for an iPad2™.

Turn on the iPad™ and launch prompter software then prepare the text to be used. Slide the

iPad™ into the mounting bracket and ensure everything is secure. If you are using an

iPad2™ fit the neoprene insert sticker to the inside of the bracket to ensure a secure fit.

If using the wired remote control plug the remote into headphone socket on the iPad™.

Adjust the prompter settings as necessary.

You should now be ready to start using the iPad™ Prompter within your project.