AUSTRALIAN MADE GREAT MATE Instrucciones de instalación y configuración - Página 13

Navegue en línea o descargue pdf Instrucciones de instalación y configuración para Motor AUSTRALIAN MADE GREAT MATE. AUSTRALIAN MADE GREAT MATE 20 páginas. Double swing gate motor kit

Imprimir página

Setting Open / Close Limit Switch Cams

LEFT HAND inward

opening gate

Bottom CAM =

Position

Top CAM =

OPEN

Bottom

Cam

FOR OUTWARD OPENING GATES REFER TO THE SPECIAL INSTRUCTION SHEET

Ensure the Internal Release is disengaged (see page 5).

Manually move the gates into the closed position. Using a 5mm allen key loosen the socket

head bolt and rotate the correct cam until it clicks the corresponding limit switch (see above).

Re-tighten the cams. Repeat for second motor.

Manually move the gates into the open position. Using a 5mm allen key loosen the socket head

bolt and rotate the correct cam until it clicks the corresponding limit switch (see above). Re-

tighten the cams. Repeat for second motor.

Engage the Internal Release (see page 5).

the gate motor is activated.

Press the handset remote and activate the gate motors to check the gate is stopping at the

required open position and closed position. Adjust the cam positions as necessary. Test the

gate motor several times to ensure the gate is stopping in the correct positions.

Ensure the gate motor is turning in the correct direction for opening the gate and the GREEN

LED light is on OR the correct direction for closing the gate and the RED LED is on as per the

pre-installation set up.

Care should be taken as there are moving components inside the gate

motor that may cause damage or personal injury.

GATE MOTOR

INSTALLATION AND SET UP

INSTRUCTIONS

Top

Socket Head

Cam

Bolt

Limit Switches

CAUTION: The gates will now open / close when

RIGHT HAND inward

opening gate

Top CAM =

Position

Bottom CAM =

OPEN