Agri-Fab Explorer 45-0175 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Carrito de exterior Agri-Fab Explorer 45-0175. Agri-Fab Explorer 45-0175 12 páginas. Poly dump cart
También para Agri-Fab Explorer 45-0175: Manual del usuario (12 páginas)
Imprimir página
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(1)
Screwdriver
(1)
Pliers
(2)
7/16" Wrenches
(2)
1/2" Wrench
(2)
9/16" Wrenches
1. Remove the hardware pack and all loose parts
from the carton.
before discarding.
2. Lay out and identify all the parts and hardware as
shown on pages 2 and 3.
3. Place the latch lock lever through the slot in the draw
bar tongue as shown in figure 1. Assemble the 5/16"
x 3-3/4" hex bolt through the tongue, the lever and
two 5/16" hex nuts (one on each side of the lever).
Assemble the 5/16" hex lock nut onto the end of the
bolt and tighten so that the bolt can still rotate freely.
Tighten the two 5/16" hex nuts against the sides of
the latch lock lever so that the lever is centered in the
slot. See figure 1.
5/16" HEX
NUTS
DRAWBAR TONGUE
5/16" x 3-3/4"
HEX BOLT
FIGURE 1
Be sure the carton is empty
LATCH
5/16" HEX
LOCK
LOCK NUT
LEVER
4. Hook the short end of the spring into the hole in the
latch lock lever. Use the spring puller tool to hook the
long end of the spring into the square hole in the
tongue. The spring puller tool can be stored when
finished. See figure 2.
SPRING PULLER TOOL
FIGURE 2
5. Assemble the hitch bracket to the drawbar tongue,
using two 3/8" x 1-1/4" hex bolts, 3/8" lock wash-
ers and 3/8" hex nuts. Tighten. See figure 3.
6. Assemble hitch pin to tongue/ hitch bracket and
secure with 1/8" hair cotter pin. See figure 3.
HITCH
BRACKET
1/8" HAIR
COTTER
PIN
FIGURE 3
4
LONG END
OF SPRING
LATCH LOCK LEVER
HITCH PIN
3/8" x 1-1/4"
HEX BOLT
TONGUE
3/8" LOCK
WASHER
3/8" HEX
NUT