Agri-Fab Explorer 45-0175 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Agri-Fab Explorer 45-0175에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Agri-Fab Explorer 45-0175 12 페이지. Poly dump cart
Agri-Fab Explorer 45-0175에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)

페이지 인쇄

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED FOR ASSEMBLY

(1)

Screwdriver

(1)

Pliers

(2)

7/16" Wrenches

(2)

1/2" Wrench

(2)

9/16" Wrenches

1. Remove the hardware pack and all loose parts

from the carton.

before discarding.

2. Lay out and identify all the parts and hardware as

shown on pages 2 and 3.

3. Place the latch lock lever through the slot in the draw

bar tongue as shown in figure 1. Assemble the 5/16"

x 3-3/4" hex bolt through the tongue, the lever and

two 5/16" hex nuts (one on each side of the lever).

Assemble the 5/16" hex lock nut onto the end of the

bolt and tighten so that the bolt can still rotate freely.

Tighten the two 5/16" hex nuts against the sides of

the latch lock lever so that the lever is centered in the

slot. See figure 1.

5/16" HEX

NUTS

DRAWBAR TONGUE

5/16" x 3-3/4"

HEX BOLT

FIGURE 1

Be sure the carton is empty

LATCH

5/16" HEX

LOCK

LOCK NUT

LEVER

4. Hook the short end of the spring into the hole in the

latch lock lever. Use the spring puller tool to hook the

long end of the spring into the square hole in the

tongue. The spring puller tool can be stored when

finished. See figure 2.

SPRING PULLER TOOL

FIGURE 2

5. Assemble the hitch bracket to the drawbar tongue,

using two 3/8" x 1-1/4" hex bolts, 3/8" lock wash-

ers and 3/8" hex nuts. Tighten. See figure 3.

6. Assemble hitch pin to tongue/ hitch bracket and

secure with 1/8" hair cotter pin. See figure 3.

HITCH

BRACKET

1/8" HAIR

COTTER

FIGURE 3

LONG END

OF SPRING

LATCH LOCK LEVER

HITCH PIN

3/8" x 1-1/4"

HEX BOLT

TONGUE

3/8" LOCK

WASHER

3/8" HEX

NUT