dymax BlueWave MX-275 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Equipos de iluminación dymax BlueWave MX-275. dymax BlueWave MX-275 16 páginas. Emitter
También para dymax BlueWave MX-275: Manual del usuario (20 páginas)
Imprimir página
10
BlueWave® MX-275 Emitter User Guide
Glass Window Replacement
(Kit 43362)
1. Before starting, disconnect power to the unit.
2. Lay the emitter on its side with the cover facing forward. Using a Philips #1 screwdriver,
loosen and fully remove the two screws (Figure 4).
3. Remove the glass retaining plate being careful not to lose the O-rings.
Figure 4. Remove Screws
NOTE: If the old window has shattered, be sure to remove all debris before attempting to
install the new glass window.
4. Wearing vinyl or cotton gloves unwrap the new window and carefully clean with the
enclosed alcohol swab. Holding the window by its sides lay it into the cavity of the emitter.
Take care not to touch the glass with bare hands, as any residue left on the window can
adversely affect the performance of the unit.
5. Clean the glass retaining plate removed in Step 3.
6. Locate and place the O-rings into the emitter nose pockets prior to installing the glass
retaining plate.
7. Assemble the two screws removed in Step 2 and lightly tighten.