dymax BlueWave MX-275 사용자 설명서 - 페이지 10

{카테고리_이름} dymax BlueWave MX-275에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dymax BlueWave MX-275 16 페이지. Emitter
dymax BlueWave MX-275에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄

BlueWave® MX-275 Emitter User Guide

Glass Window Replacement

(Kit 43362)

1. Before starting, disconnect power to the unit.

2. Lay the emitter on its side with the cover facing forward. Using a Philips #1 screwdriver,

loosen and fully remove the two screws (Figure 4).

3. Remove the glass retaining plate being careful not to lose the O-rings.

Figure 4. Remove Screws

NOTE: If the old window has shattered, be sure to remove all debris before attempting to

install the new glass window.

4. Wearing vinyl or cotton gloves unwrap the new window and carefully clean with the

enclosed alcohol swab. Holding the window by its sides lay it into the cavity of the emitter.

Take care not to touch the glass with bare hands, as any residue left on the window can

adversely affect the performance of the unit.

5. Clean the glass retaining plate removed in Step 3.

6. Locate and place the O-rings into the emitter nose pockets prior to installing the glass

retaining plate.

7. Assemble the two screws removed in Step 2 and lightly tighten.