Dymec DY-HI8011-90bt Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Equipos de laboratorio Dymec DY-HI8011-90bt. Dymec DY-HI8011-90bt 7 páginas. Hardened industrial 802.3bt gigabit poe injector, 1 x 10/100/1000m tx 90w pse + 1 x 10/100/1000m tx, 52-56 vdc input, operating temp.: -40c to +75c
Imprimir páginaDYMEC
NOTE
Always make sure the total length of the TX cable DOES NOT exceed 100meter. Total
length is defined as length A + length B
A
B
Remote Switch
PD
Length A + Length B < 100 meters
POE signal attenuates every meter, the built-in transformer allows the attenuation to reach
100 meters to follow IEEE 802.3af/at/bt standards. The higher quality PD you connect to, the
more reliable the network will be. When connecting to a poor-quality PD, it cannot generate
a strong enough signal for the remote switch. Always make sure you have a high-quality PD
to perform your desired network.
Introduction
This ultrahigh power IEEE 802.3bt 90Watts POE Injector is equipped with one IEEE
802.3af/at/bt 90W Giga PSE port to power up 90Watts PD device for camera, WiFi AP, or
LoRa applications. This high power bt device is also backward compatible with both 95W
PoH and 60W uPoE to be used as a general usage high power PoE product. This means that
this unit can be used as a general purpose solution for many high power PoE applications.
This unit is designed for high-power broadband WIFI, 802.3bt, PoH, uPoE devices, and a
broad range of applications. This unit is designed for IP surveillance, traffic monitoring,
outdoor camera and for a broad range of applications. It can tolerate -40°C to +75°C in harsh
environment to perform a reliable network.
2