Dymec DY-HI8011-90bt Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de laboratório Dymec DY-HI8011-90bt. Dymec DY-HI8011-90bt 7 páginas. Hardened industrial 802.3bt gigabit poe injector, 1 x 10/100/1000m tx 90w pse + 1 x 10/100/1000m tx, 52-56 vdc input, operating temp.: -40c to +75c

Imprimir página

DYMEC

NOTE

Always make sure the total length of the TX cable DOES NOT exceed 100meter. Total

length is defined as length A + length B

Remote Switch

Length A + Length B < 100 meters

POE signal attenuates every meter, the built-in transformer allows the attenuation to reach

100 meters to follow IEEE 802.3af/at/bt standards. The higher quality PD you connect to, the

more reliable the network will be. When connecting to a poor-quality PD, it cannot generate

a strong enough signal for the remote switch. Always make sure you have a high-quality PD

to perform your desired network.

Introduction

This ultrahigh power IEEE 802.3bt 90Watts POE Injector is equipped with one IEEE

802.3af/at/bt 90W Giga PSE port to power up 90Watts PD device for camera, WiFi AP, or

LoRa applications. This high power bt device is also backward compatible with both 95W

PoH and 60W uPoE to be used as a general usage high power PoE product. This means that

this unit can be used as a general purpose solution for many high power PoE applications.

This unit is designed for high-power broadband WIFI, 802.3bt, PoH, uPoE devices, and a

broad range of applications. This unit is designed for IP surveillance, traffic monitoring,

outdoor camera and for a broad range of applications. It can tolerate -40°C to +75°C in harsh

environment to perform a reliable network.