Dymec DY-HI8011-90bt Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de laboratório Dymec DY-HI8011-90bt. Dymec DY-HI8011-90bt 7 páginas. Hardened industrial 802.3bt gigabit poe injector, 1 x 10/100/1000m tx 90w pse + 1 x 10/100/1000m tx, 52-56 vdc input, operating temp.: -40c to +75c

Imprimir página

DYMEC

Installation package

This unit can be din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted

brackets are included.

Power connection

This unit provides a 4 pin terminal block. It can be operated using 52-56VDC power source.

Always make sure your input voltage is within this supported voltage range.

To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,

+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a

neutral wire to the ground screw.

+V1- is for power input one connection.

+V2- is for power input two connection.

Power connecting procedure:

+V1- +V2-

WARNING -- Always SHUT OFF power source to connect power wire.

WARNING -- Any exceeded input voltage will not make this unit function and may

damage this unit.

STEP 1 – Take out 4 pin terminal block located

in the included mounting kit package.

STEP 2 – Connect power wires to +V1- or +V2-

with corresponding polarity. Connect the

grounding wire to the ground screw.

STEP 3 – Plug into terminal block socket shown

above. Polarity needs to match V+ and V-.