Dymo 17897 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Etiquetadora Dymo 17897. Dymo 17897 17 páginas. Electronic label maker
Imprimir página
Printing Multiple Copies
You can print up to 16 copies of a label at one time.
When printing multiple copies, a dotted cut-line is
printed between each label.
To print multiple copies of the label
1. Press
and then select Set # Copies.
2. Press the up arrow key to increase the number
of copies to print.
3. Press the down arrow key to begin decreasing
the number of copies from 16.
4. Press
.
5. Press
to begin printing.
G
When printing is finished, the number of copies to
print returns to the default value of 1.
Serializing Your Labels
You can print a series of labels with the last number
incremented by one number. The number of labels
serialized depends upon the number of copies you
selected to print. Only the last series of numbers
that follows any letter, space, or punctuation will be
serialized. For example, abc123 will print as
abc123, abc124, abc125; and 123-998 will print as
123-998, 123-999, 123-1000, and so on.
To serialize your labels
1. Enter the text for your label.
2. Select the number of labels to print as described
in Printing Multiple Copies on page 10.
3. Select
+
G
Printing a Fixed-Length Label
Normally, the length of the label is determined by
the length of the text entered. However, you may
wish to make a label for a specific purpose that is a
fixed length regardless of the length of the text.
10
.
You can specify a fixed length for a label in 2 mm
(0.1") increments between 40 mm (1.5") and
400 mm (15.0"). The preset fixed length is 100 mm
(4.0"). Any change you make to the fixed-length
setting remains in effect until you change it.
To set the label length
1. Press
+
2. Select ON to turn on Fixed Length.
3. Press the up arrow to increase the length.
4. Press the down arrow to decrease the length.
5. Press
to set the fixed length.
6. After you print the label, repeat step 1 and turn
Fixed Length OFF; otherwise, all your
subsequent labels will print with this fixed length.
Printing Barcode Labels
The labelmaker can print barcodes in six standard
formats: UPC A, UPC E, EAN8, EAN13, CODE-39,
and CODE-128. You can only print a barcode on
19 mm (3/4") labels; and you can only print one
barcode per label.
The barcode prints horizontally along the label with
the text in small print underneath the barcode. You
can optionally add text before and after the
barcode. Or, you can add text above or below the
barcode by creating a two-line label. See Creating
Multi-Line Labels on page 6.
Four of the standard barcodes require a fixed
number of characters to generate the barcode:
EAN-8, EAN-13, UPC-A, and UPC-E. CODE-39
and CODE-128 barcodes allow a variable number
of characters to be entered.
To create a barcode
1. Enter the text you wish to appear before the
barcode on the label. (Optional)
2. Press
.
Preview
Insert
3. Select Insert Barcode and press
4. Use the arrow keys to select the barcode type,
and press
.
.
.