Dymo 17897 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Etichettatrice Dymo 17897. Dymo 17897 17. Electronic label maker

Stampa la pagina

Printing Multiple Copies

You can print up to 16 copies of a label at one time.

When printing multiple copies, a dotted cut-line is

printed between each label.

To print multiple copies of the label

1. Press

and then select Set # Copies.

2. Press the up arrow key to increase the number

of copies to print.

3. Press the down arrow key to begin decreasing

the number of copies from 16.

4. Press

5. Press

to begin printing.

When printing is finished, the number of copies to

print returns to the default value of 1.

Serializing Your Labels

You can print a series of labels with the last number

incremented by one number. The number of labels

serialized depends upon the number of copies you

selected to print. Only the last series of numbers

that follows any letter, space, or punctuation will be

serialized. For example, abc123 will print as

abc123, abc124, abc125; and 123-998 will print as

123-998, 123-999, 123-1000, and so on.

To serialize your labels

1. Enter the text for your label.

2. Select the number of labels to print as described

in Printing Multiple Copies on page 10.

3. Select

Printing a Fixed-Length Label

Normally, the length of the label is determined by

the length of the text entered. However, you may

wish to make a label for a specific purpose that is a

fixed length regardless of the length of the text.

You can specify a fixed length for a label in 2 mm

(0.1") increments between 40 mm (1.5") and

400 mm (15.0"). The preset fixed length is 100 mm

(4.0"). Any change you make to the fixed-length

setting remains in effect until you change it.

To set the label length

1. Press

2. Select ON to turn on Fixed Length.

3. Press the up arrow to increase the length.

4. Press the down arrow to decrease the length.

5. Press

to set the fixed length.

6. After you print the label, repeat step 1 and turn

Fixed Length OFF; otherwise, all your

subsequent labels will print with this fixed length.

Printing Barcode Labels

The labelmaker can print barcodes in six standard

formats: UPC A, UPC E, EAN8, EAN13, CODE-39,

and CODE-128. You can only print a barcode on

19 mm (3/4") labels; and you can only print one

barcode per label.

The barcode prints horizontally along the label with

the text in small print underneath the barcode. You

can optionally add text before and after the

barcode. Or, you can add text above or below the

barcode by creating a two-line label. See Creating

Multi-Line Labels on page 6.

Four of the standard barcodes require a fixed

number of characters to generate the barcode:

EAN-8, EAN-13, UPC-A, and UPC-E. CODE-39

and CODE-128 barcodes allow a variable number

of characters to be entered.

To create a barcode

1. Enter the text you wish to appear before the

barcode on the label. (Optional)

2. Press

Preview

Insert

3. Select Insert Barcode and press

4. Use the arrow keys to select the barcode type,

and press