GABOR ACCUGEAR UPMP-1000 Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Bastidores y soportes GABOR ACCUGEAR UPMP-1000. GABOR ACCUGEAR UPMP-1000 16 páginas. Universal projector mount
Imprimir página
If your projector model has only three holes for mounting, then remove the
fourth arm with the hex key (I).
Warning! Do not use the projector mount with only two arms.
3. Slide the arms around the projector
mount and along the arm's shaft to
position them over your projector's
mounting holes. Make sure the notch
on the mount is as close to the
center of gravity for your projector
as possible.
4. Use the hex key (I) and the screws
from step 1 to secure the mount to
the projector, and tighten the arms
until secure.
5. Once the projector mount is attached to your projector, adjust the feet of the
arms vertically to level the mount.
Loosen
I
Adjust
Tighten
I
9