Dymo LabelWriter DUO Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Servidor de impresión Dymo LabelWriter DUO. Dymo LabelWriter DUO 8 páginas. Dymo labelwriter printer quick start
También para Dymo LabelWriter DUO: Manual de inicio rápido (14 páginas), Manual de inicio rápido (12 páginas), Visión general (2 páginas), Manual del usuario (19 páginas), Manual de inicio rápido (6 páginas)

To load the D1 tape cassette

1 Press the button on the front of the printer to open the

tape cassette tray.

2 Set the cassette switch for the size of the tape cassette

that you are inserting. See Figure 9. A notch in the

cassette fits over the switch when the cassette is in the

correct position.

NOTE The first time you use the printer, remove the

protective cardboard insert from between the print head and

pinch roller. See Figure 9.

3 Make sure the tape and ribbon are taut across the

mouth of the cassette and that the tape passes between the guideposts. If necessary, turn the

spool clockwise to tighten the ribbon.

4 Insert the cassette with the tape and ribbon positioned

between the print head and pinch roller. See Figure 10.

5 Press firmly until cassette clicks into place. Make sure tape

and ribbon are positioned correctly.

6 Press the button to close the tape cassette tray.

You are now ready to print your first label.

Set cassette

switch

Push down gently

= 6 mm

= 9/12 mm

= 19/24 mm

Remove cardboard insert

Figure 9

Print Head

Pinch Roller

Figure 10