Dymo LabelWriter DUO 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Dymo LabelWriter DUO에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter DUO 8 페이지. Dymo labelwriter printer quick start
Dymo LabelWriter DUO에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (12 페이지), 개요 (2 페이지), 사용자 설명서 (19 페이지), 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄

To load the D1 tape cassette

1 Press the button on the front of the printer to open the

tape cassette tray.

2 Set the cassette switch for the size of the tape cassette

that you are inserting. See Figure 9. A notch in the

cassette fits over the switch when the cassette is in the

correct position.

NOTE The first time you use the printer, remove the

protective cardboard insert from between the print head and

pinch roller. See Figure 9.

3 Make sure the tape and ribbon are taut across the

mouth of the cassette and that the tape passes between the guideposts. If necessary, turn the

spool clockwise to tighten the ribbon.

4 Insert the cassette with the tape and ribbon positioned

between the print head and pinch roller. See Figure 10.

5 Press firmly until cassette clicks into place. Make sure tape

and ribbon are positioned correctly.

6 Press the button to close the tape cassette tray.

You are now ready to print your first label.

Set cassette

switch

Push down gently

= 6 mm

= 9/12 mm

= 19/24 mm

Remove cardboard insert

Figure 9

Print Head

Pinch Roller

Figure 10