Gage Bilt GB703SRVT/6N10E Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Herramienta eléctrica Gage Bilt GB703SRVT/6N10E. Gage Bilt GB703SRVT/6N10E 14 páginas. Installation tool

Imprimir página
HEAD
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assembly (703134).
Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder ass'y (703134). Be careful not
to damage threads or cause burrs on polished piston surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket.
30617 - JAW ASSY
20518 - COLLET
10757 - ANVIL HOLDER
10204
NOSE TIP
70856 - JAM NUT
703009
SLEEVE EXTENSION
402482 - BUTTON HEAD
CAP SCREW
S572 - STAT-O-SEAL
703134 - HEAD CYLINDER ASSY.
S832 - O'RING
704129 - GASKET
402482 - B.H.C.S.
S572 - STAT-O-SEAL
744306
MANIFOLD-HEAD
ASSY
704130
AIR ACTUATOR
ASSY
400061
SOCKET HEAD
CAP SCREW (2)
703460 - FOLLOWER ASSY
703011 - TUBE
703015
DRAWBOLT EXTENSION
S834 - O'RING
401089 - BACK-UP RING
S834 - O'RING
401816 - PLUG
204304 - SWIVEL ASSY
(INCLUDES 401080 & 403764)
A-336
HYDRAULIC HOSE
724017 LEVER
ASSY
400066
SOCKET HEAD
CAP SCREW (2)
S572 - STAT-O-SEAL (2)
703533 - UNION
70820 - JAM NUT
405371 - SPRING
70856 - JAM NUT
703044
SLEEVE EXTENSION
S829 - O'RING
400788 - O'RING
405865 - POLYSEAL
703607 - PISTON
703563 - HOSE GUARD (NOT SHOWN)
704305 - AIR LINE
A-144 - HOSE CLAMP (2)
S1181 - BARBED FITTING (2)
744303 - MANIFOLD-HANDLE
402482
BUTTON HEAD
CAP SCREW (2)
10
703046 - TUBE
703045
DRAWBOLT EXTENSION
703114 - END CAP
400788 - O'RING
204304 - SWIVEL ASSEMBLY
401080 - BACK-UP RING
A-663 - HANGER
403764 - O'RING
8/14