Gage Bilt GB703SRVT/6N10E User Manual - Page 10

Browse online or download pdf User Manual for Power Tool Gage Bilt GB703SRVT/6N10E. Gage Bilt GB703SRVT/6N10E 14 pages. Installation tool

Print Page

HEAD

WARNING:

Dispose of Hydraulic Oil in accordance with applicable regulations.

Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assembly (703134).

Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder ass'y (703134). Be careful not

to damage threads or cause burrs on polished piston surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket.

30617 - JAW ASSY

20518 - COLLET

10757 - ANVIL HOLDER

10204

NOSE TIP

70856 - JAM NUT

703009

SLEEVE EXTENSION

402482 - BUTTON HEAD

CAP SCREW

S572 - STAT-O-SEAL

703134 - HEAD CYLINDER ASSY.

S832 - O'RING

704129 - GASKET

402482 - B.H.C.S.

S572 - STAT-O-SEAL

744306

MANIFOLD-HEAD

ASSY

704130

AIR ACTUATOR

ASSY

400061

SOCKET HEAD

CAP SCREW (2)

703460 - FOLLOWER ASSY

703011 - TUBE

703015

DRAWBOLT EXTENSION

S834 - O'RING

401089 - BACK-UP RING

S834 - O'RING

401816 - PLUG

204304 - SWIVEL ASSY

(INCLUDES 401080 & 403764)

A-336

HYDRAULIC HOSE

724017 LEVER

ASSY

400066

SOCKET HEAD

CAP SCREW (2)

S572 - STAT-O-SEAL (2)

703533 - UNION

70820 - JAM NUT

405371 - SPRING

70856 - JAM NUT

703044

SLEEVE EXTENSION

S829 - O'RING

400788 - O'RING

405865 - POLYSEAL

703607 - PISTON

703563 - HOSE GUARD (NOT SHOWN)

704305 - AIR LINE

A-144 - HOSE CLAMP (2)

S1181 - BARBED FITTING (2)

744303 - MANIFOLD-HANDLE

402482

BUTTON HEAD

CAP SCREW (2)

703046 - TUBE

703045

DRAWBOLT EXTENSION

703114 - END CAP

400788 - O'RING

204304 - SWIVEL ASSEMBLY

401080 - BACK-UP RING

A-663 - HANGER

403764 - O'RING

8/14