Gage Bilt GB752 Manual de instrucciones original - Página 4

Navegue en línea o descargue pdf Manual de instrucciones original para Remachadoras Gage Bilt GB752. Gage Bilt GB752 20 páginas.
También para Gage Bilt GB752: Información sobre la herramienta de instalación (13 páginas), Información sobre la herramienta de instalación (12 páginas)

WARNING:

Any other use is forbidden.

The GB752 is a pneumatic-hydraulic tool designed specifically for the efficient installation of blind rivets. It weighs 4.30 lbs. (1.9 kg)

and can be operated in any position. It has a .500" (12.7 mm) fastener setting stroke and a rated pull load of 3,800 lbs. (16.9 kN) with 90

psi (6.2 bar) air pressure at the air inlet.

The GB752 installation tool is designed to operate on 90 to 100 psi (6.2-6.9 bar) of air pressure with 90 psi (6.2 bar) providing the maximum

efficiency. At 90 psi (6.2 bar) air pressure, the GB752 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).

The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart

on page 18).

WARNING:

Do not operate in an explosive atmosphere.

The GB752 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB752 S/N: 3210 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Hand Held Weight

- 4.30 lbs. (1.9 kg)

Air pressure req'd

- 90-100 p.s.i. (6.2-6.9 bar)

Air consumption

- .16 SCF/cycle (4.53 L/cycle)

Hydraulic oil

- Automatic Transmission Oil,

Setting stroke

- .500" (12.7 mm)

Rated pull load

- 3,800 lbs. (16.9 kN)

Noise level

- 81.5 dB(A)

Vibration

- Tested– No Hazards Found

Dexron® III, or equivalent.

REV. 5/22