Gage Bilt GB752 Orijinal Talimat Kılavuzu - Sayfa 4
Perçin Aletleri Gage Bilt GB752 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Gage Bilt GB752 20 sayfaları.
Ayrıca Gage Bilt GB752 için: Kurulum Aracı Bilgileri (13 sayfalar), Kurulum Aracı Bilgileri (12 sayfalar)
Sayfayı Yazdır
WARNING:
Any other use is forbidden.
The GB752 is a pneumatic-hydraulic tool designed specifically for the efficient installation of blind rivets. It weighs 4.30 lbs. (1.9 kg)
and can be operated in any position. It has a .500" (12.7 mm) fastener setting stroke and a rated pull load of 3,800 lbs. (16.9 kN) with 90
psi (6.2 bar) air pressure at the air inlet.
The GB752 installation tool is designed to operate on 90 to 100 psi (6.2-6.9 bar) of air pressure with 90 psi (6.2 bar) providing the maximum
efficiency. At 90 psi (6.2 bar) air pressure, the GB752 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on page 18).
WARNING:
Do not operate in an explosive atmosphere.
The GB752 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB752 S/N: 3210 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 4.30 lbs. (1.9 kg)
Air pressure req'd
- 90-100 p.s.i. (6.2-6.9 bar)
Air consumption
- .16 SCF/cycle (4.53 L/cycle)
Hydraulic oil
- Automatic Transmission Oil,
Setting stroke
- .500" (12.7 mm)
Rated pull load
- 3,800 lbs. (16.9 kN)
Noise level
- 81.5 dB(A)
Vibration
- Tested– No Hazards Found
Dexron® III, or equivalent.
4
REV. 5/22